Bearing Cassette: $3.25
Sold in pairs, need two per kart.

Child Neck Brace : $35.99
Junior Neck Brace. 

Left Front Spindle: $52.00

Double Bearing.

Throttle Pedal: $20
Junior Throttle Pedal.

VanK Black Wheel: $43.75
6.00x6 Black Aluminum wheel.

Spindle Heims: $24.50
This kits comes with 4-Heims and Jam Nuts enough for the RF and LF Spindles. 

Light Weight Cassette: $30.00

Steering Shaft: $16.50
Steering Shaft is 5/8" OD and is shipped long so you can cut it to length.

Kill Switch $10
Kill Switch for driver to kill the motor

Child Racing Gloves : $49.99
When you order we will call to get size.

Sprocket Hub: $33.75
Aluminum one piece design.

MWA Spec Max-T Clutch: $39.95
12 tooth clutch.

Rear Hub: $15.00
Sold as each, need two per kart. Studs and Lug Nuts are not included.

Spindle Heims: $24.50
This kits comes with 4-Heims and Jam Nuts enough for the RF and LF Spindles. 

Axle Bearing: $7.50
Sold as each, need two per kart.

Axle Clamp: $5.00
Axle clamp collar. Sold as each.

Window Net : $17
SFI, need two per kart.

Zamp Helmet : $149.99
When you order we will call to get size.

MWA Restrictor Plate: $10.00
Restrictor Plate

Gear $20

53-80 Tooth gears, when order we will call you to get sizes.

Brake / Throttle Clevis: $2.50
Sold as each, need two per Brake Rod / per Kart and one on the Throttle Rod.

Steering Shaft Clamps: $3.25
Need two per build. Steel 5/8" clamp.

Throttle Cable: $7.50
Throttle Cable for Mini Wedge, need to cut to length.

Morey Fab Fuel Tank: $99.99
4qt Fuel Tank. Designed for the Morey Chassis

Complete Race Ready: $3,100
Complete chassis with bumpers, kick rails and all mounts. Chassis color is your choice and Body color is your choice. Race car will come completely race ready minus Oil, Fuel and Kill Switch. 

Morey Fab Chassis: $800.00
Complete chassis with bumpers, kick rails and all mounts.

Spec Noram Clutch: $90.00
Stock Spec Clutch 13 tooth.

Hoosier Tire: $65.00
Spec Hoosier Tire for the MWA.

Brake Pedal: $20
Junior Brake Pedal.

Brake Rod: $7.00
Brake Rod comes threaded on both ends. You will have to bend it to line up correctly.

Fuel Pump / Throttle Plate: $43.99
Fuel Pump with the Throttle Plate

Tie Rod Kit: $30.00
Complete kit includes both Right Front and Left Front tie rod.

Air Filter Kit: $49.95
Air Filter kit for 6.5 HP MWA engine. 

Wheel Studs and Lugs: $2.50
Sold in packs of three. Need four packs per kart.

Front Hub: $15.00
Sold as each, need two per kart. Studs and Lug Nuts are not included.

Lower Steering Support: $6.25
Lower Steering Shaft Support. One needed per Kart.

Idler Arm: $5.00
Steel idler arm for Steering Shaft

36" Axle: $43.50
Steel Mini Wedge Axle. Need two snap rings and two key stocks to go with it.

2017 Motor Mount: $60
Designed on a 7 degree angle

Quick Disconnect: $38.00
5/8" Hex Steering Quick Disconnect. 

MWA Spec Tomar Clutch: $300
Designed for the weight and low rpm of an American Ethanol Mini Wedge. 12T 

Right Front Spindle: $52.00

Double Bearing.

Brake Kit: $187.50
Kit includes, Brake Rotor, Brake Caliper, Brake Pads, Brake Lines, Master Cylinder and Brake Rotor Hub.

Child Suit : $99.99
When ordering we will contact to to get size.

Throttle Rod: $7.00
Brake Rod comes threaded on both ends. You will have to bend it to line up correctly.

Child Racing Belts : $80.00
SFI,

Axle Snap Ring: $1.50
Sold as each! Need two per axle.

Spec MWA Motor: $180.00
6.5hp Motor.

Key Stock: $3.00
Sold per inch. Need four per axle.

Chain: $24.00
Chain will need to be set after motor is bolted in. You might have to remove a few links.